3D Models
3D Print Models
3D Scans
Animation & MoCap
Textures
Materials
Skin Textures
2D Game Assets
Sound Effects
Brushes & Tools
Reference Photos
Stock Images
HDR Images
3ds Max
Maya
Blender
Unreal Engine
Unity
ZBrush
Cinema 4D
LightWave
Marmoset
SketchUp
FBX
DAE
DXF
GLBstructural defect in poses (CLOSED)
143Thread Activity
CosmicEnvisionsTue, Oct 31, 2023
halil_ezTue, Oct 31, 2023
halil_ezSun, Oct 29, 2023
halil_ezSun, Oct 29, 2023
guy91600Sun, Oct 29, 2023
halil_ezSun, Oct 29, 2023
Genesis 8 kadn ve genesis 8.1 kadn modellerinde bu pozlarda byle bir yapsal bozukluk var. Bir zm bulmama yardm edebilir misin?
! REPORT
I tried to reproduce your pose with Genesis 8 female basic version provided by Daz3d, the pose is not strictly identical but is close enough to understand what is happening
In my opinion, to find the origin of the deformation we need to have information on these two points:
1) are you using a morphed version of Genesis 8 or the basic version provided by Daz3d?
2) Is Thigh's Bend setting greater than the default limits?
In my opinion, to find the origin of the deformation we need to have information on these two points:
1) are you using a morphed version of Genesis 8 or the basic version provided by Daz3d?
2) Is Thigh's Bend setting greater than the default limits?
! REPORT
Since G8F and G8.1F are using the same morphs and the issue occurs with both figures, it could be that a morph is out of control and automatically dials in everytime the G8F/G8.1F figure is loaded. Check the following: Select the G8F/G8.1F figure and click on "Currently Used" in the Parameters tab. Here you can see all currently active morphs. You need to check whether any morph is dialed in that doesn't belong to the G8F base figure, is not at 0% and which you didn't deliberately dial in. If there's such a morph, it may be the one that causes the deformation, so dial it out. If the deformation vanishes find out to which product the morph belongs.
! REPORT
It could also be that it's caused by a faulty JCM (Joint Corrective Morph), so please also check the hidden morphs. If you don't see any hidden morphs, rightclick on the Parameters tab and select Preferences -> Show Hidden Properties.
! REPORT
1. I am using the base version provided by daz 3 for genesis 8
2. What should be the bend setting?
2. What should be the bend setting?
! REPORT
CosmicEnvisionsSat, Oct 28, 2023
Account Closed
I had a issue Back in June with a morph that effected all my Genesis 8 Models, It took me a week to Fix.
Heres a solution i found by removing the File.
Load your Genesis 8 Model into a empty Scene.
Make sure "Show Hidden Properties" is Ticked
Below
I added a morph as an Example.
Goto Help, Troubleshooting, View Log File.
Daz Studio will create a log file for you in notepad.
Scroll to the Bottom of the Text Document and click the Mouse at the Bottom.
Then Press CTRL F, which will bring up a search Tab.
At the Bottom is the most recent Date of the Log file.
You want to type 'Morph' in the find box
Or you could type "Loaded Morph" in the find Box
Select the direction up
Then Click the find Next.
You will see the date which you created the log
and the Morph that was loaded.
Then you can figure out what was causing it
and removing it to fix your Genesis 8 model.
The problem i had was from the Below File
2023-06-27 13:56:22.339 [INFO] :: Loaded morph deltas: 0m 0.16s - /data/DAZ 3D/Genesis 8/Female/Morphs/CBG_3D/Symboite_BodySuit/Bodysuit_BaseMesh_Morph.dsf
I downloaded the item again from renderhub, had a look at the file structure so i knew where the files were kept.
Then i removed them.
I hope this helps, its a pain and frustrating
Heres a solution i found by removing the File.
Load your Genesis 8 Model into a empty Scene.
Make sure "Show Hidden Properties" is Ticked
Below
I added a morph as an Example.
Goto Help, Troubleshooting, View Log File.
Daz Studio will create a log file for you in notepad.
Scroll to the Bottom of the Text Document and click the Mouse at the Bottom.
Then Press CTRL F, which will bring up a search Tab.
At the Bottom is the most recent Date of the Log file.
You want to type 'Morph' in the find box
Or you could type "Loaded Morph" in the find Box
Select the direction up
Then Click the find Next.
You will see the date which you created the log
and the Morph that was loaded.
Then you can figure out what was causing it
and removing it to fix your Genesis 8 model.
The problem i had was from the Below File
2023-06-27 13:56:22.339 [INFO] :: Loaded morph deltas: 0m 0.16s - /data/DAZ 3D/Genesis 8/Female/Morphs/CBG_3D/Symboite_BodySuit/Bodysuit_BaseMesh_Morph.dsf
I downloaded the item again from renderhub, had a look at the file structure so i knew where the files were kept.
Then i removed them.
I hope this helps, its a pain and frustrating
! REPORT
CosmicEnvisions
Account Closed
Sat, Oct 28, 2023I forgot to add
You should go through the morphs turning them off until you find it.
If its a hidden morph thats where the log file will come in handy.
If its got the name of the file it should make it easier.
You should go through the morphs turning them off until you find it.
If its a hidden morph thats where the log file will come in handy.
If its got the name of the file it should make it easier.
guy91600
Karma: 13,078
Sun, Oct 29, 2023Thank you for this tutorial which allows you to determine which morph is causing a malfunction.
This problem can happen with any version of Genesis, and your solution is universal!
This problem can happen with any version of Genesis, and your solution is universal!
CosmicEnvisions
Account Closed
Tue, Oct 31, 2023Your welcome.
You just need to learn how to read the log files which can be confusing to start with.
Keep doing it and testing you eventually learn.
I learnt from the Daz forums so thanks to those people.
You just need to learn how to read the log files which can be confusing to start with.
Keep doing it and testing you eventually learn.
I learnt from the Daz forums so thanks to those people.
CosmicEnvisions
Account Closed
Sun, Oct 29, 2023It was one of the last purchases I made and installed.
And it shouldn't be in the log.
Only the base Genesis morphs should load.
It took me ages to figure out.
I also install my 3rd party content to a different place on my hard drive.
I disabled it by renaming it so daz would not recognise it. Loaded up Daz, loaded the Genesis 8 base figure, and it worked Fine.
So I knew it was 3rd party content that was doing it.
If you like you can save the log file and send it via google drive via private message and I can have a look and see what the problem is.
But you'll have to wait 14 hours or so, I gotta sleep and have a busy day at work. I can look at it after that.
Upto you mate.
Otherwise I can post the Genesis 8 base morph logs here and you can check them out yourself, it will have to be tommorow.
And it shouldn't be in the log.
Only the base Genesis morphs should load.
It took me ages to figure out.
I also install my 3rd party content to a different place on my hard drive.
I disabled it by renaming it so daz would not recognise it. Loaded up Daz, loaded the Genesis 8 base figure, and it worked Fine.
So I knew it was 3rd party content that was doing it.
If you like you can save the log file and send it via google drive via private message and I can have a look and see what the problem is.
But you'll have to wait 14 hours or so, I gotta sleep and have a busy day at work. I can look at it after that.
Upto you mate.
Otherwise I can post the Genesis 8 base morph logs here and you can check them out yourself, it will have to be tommorow.
halil_ez
Karma: 328
Sun, Oct 29, 2023It's very nice of you to do this for me. If you send me your e-mail address, I can send it to you from there. Have a nice working day
