Morphing wrestling ring daz studio (CLOSED) (CLOSED)

Would anyone be interested in making a morphing wrestling ring  for Daz studio? I had one that worked great, but after a hard drive failure and new build, I can only use the latest version of Daz and the ring will not work any longer. I am needing something with ropes that move up/down ,in/out. I would like for the ring to have as many morphs as possible to mimic a real wrestling ring including movement of ropes, turn buckles and the mat.

Please let me know if I can hire you for this project.

Thanks

For information, I have 2 versions of Daz Studio installed on my PC. Version 4.12 and version 4.22.
I can therefore use both versions simultaneously
Here is how I installed the 2 versions manually from the Zip files downloaded from DAZ3D.com
1) I installed version 4.12. I then renamed the installation folder to "DAZStudio421". This version is physically installed with this path: C:Program FilesDAZ 3DDAZStudio421
I then created the shortcut to the program on the desktop
2) I manually installed version 4.22
3) Version 4.12 has one problem you should be aware of. In my rendering tests, Genesis 9 was always grayed out.

This might help you if you can't find anyone to make a ring that suits you.

Thank you for your help, I only have the newest version of Daz. The older version was lost due hard drive damage.

I think I have an idea about how to do it-  would create the ring as an object and I would apply morfs bending the ropes and the posts.  I am not certain why it could work with a version of DAZ and not with another one. Morfs and d-formers are used since the beginning of DAZ
Let me try and you value the results.

I have created a ring. As you can see, it has been scalled to match the DAZ characters. 

I have created a morf that bends nicelly the cords and the post. 

I have done that on a single corner, at 25% distance to the post, but if you need I can do it centered and on the 4 sides of the ring. 
I need your comments to finish the job. 

The morf affects mainly to the upper rope and the post, but I can also make to affect the lower ropes as well. . Again, your guidance is required.

 
I am sorry, I should have been more specific. I was thinking of something more like this. 3 ropes with turn buckles in the corners . All 3 ropes could move independently making it possible to tie up the character in the ropes as seen here.

G8F please.

I will do a pose that is like the drawing you have attached, for G8F and I will adjust the morfs in the cords, to allow the trapped pose you suggest. 

Give me a couple of days. 
Is it the ring OK in the other aspects? Do you need to have only three cord for a specific reason? Do you want I to change the colors or the texture of the boxing floor?

I only create wrestling scenes and wrestling rings have 3 ropes. 4 ropes are usually for boxing rings. If you look at YouTube videos of professional wrestling, most of the wrestling rings have 3 ropes and the padded turn buckles.  Wrestling and Boxing rings differ quite a bit in design.  I just try to make it as realistic as possible. The colors are fine. 

I was planning to do a morf simulating the movement of the ropes. Unfortunately, when the morf is carried to its limits, as forcing the middle rope structure to move up as much as required, the rope is deformed so not longer it is cylindrical, but the circle becomes an ellipse, or a box. (see example)
I am planning to do two rings. One is a normal one with morfs to deform the ropes, as I was visualizing at the beginning. Then, you may simulate situations when a fighter impacts the ropes, and these deform. 
To simulate the extreme bending of the middle rope, to "trap" the fighter, I will create a second ring, already deformed, so the morfs will perform small modifications to the ropes, to adjust the desired effect, but starting from a situation in which the middle rope is already deformed up.
Would you agree with that approach?

I am not sure I completely understand what you are saying, but you know what doing. I wouldn't know where to start.

I will create some scenes for you to value. Give some time. 

I think I got what you wanted. Let me explain:
-I Have created a ring, with 3 sets of ropes: red white and blue.  (pic.1)
-The ropes red and white are deformed using to morfs. They move in-out the ring  and up - down following two different MORFS. That may be used to simulate the fighters impacting against the ropes- (pic2)
- Another different ring has been created having the white rope pre-deformed up, to facilitate the pose of "tied up". While the ropes may be further adjusted, the middle rope of the ring has been curved so minor displacement is to be added when applying the morfs. By doing that, I allow the Tied up pose, without forcing the excessive displacement of the rope, by means of a morf. (pic3)
- I have created two poses for G8f. One hammering against the ropes and the other one simulating the pose tied by the ropes. (pic 3 and 4)
I hope you will value the effort. Could you propose a price for the complete set?
Also feel free to introduce small modifications. 

I don't want to insult you with a too low of a price. Tell me what you are looking for a price. Hopefully we can agree on a price that we both feel comfortable with.

I am going to review the tied up posture to produce a more natural look

I have already uploaded the files in my store at $25

The model has been specifically made for you and I don't think anybody else may be interested. 
INSTALLING THE FILES:
Simply unzip the ring.zip file and copy the files in My DAZ 3D Library. 

What you will have in the zip
1: Two different rings as duf files:
You will find the files in My DAZ 3d Library/Props/Aracnide/ring/
The first one includes the ring base and the ropes, with morfs to simulate the impact of the wrestlers against the ropes. 
The second one has been specifically designed to simulate the "tied up scene". Howevwer, morfs have been included to slightly modify the position of the upper and middle ropes. 
The textures for the ropes and the ring are located in My DAZ 3d Library/runtime/textures/Arcnide/ring/
2: Two G8f poses: to simulate the poses for tied up and impacting against the ropes-
The files are located in My DAZ 3D library/People/Genesis 8 Female/poses/aracnide/




----+

I went to your store to buy this, but I do not see it there now. It was there yesterday.

Sorry
Renederhub administrator removed it, because he says blender and OBJ. files cannot be attached in a DAZ content model. I have uploaded as a 3d model. 
It is available now. 

The ring is available now in my store. Are  you going to buy it?

The ring is available now in my store. Are  you going to buy it?

The ring is available now in my store. Are  you going to buy it?

I bought it yesterday

If you need me to, I can send the receipt that Render Hub emailed me. I am not sure how you are notified when something is purchased from your store.

Are you satisfied with the ring?
Is there something you want I to change?