Focus Picker - Camera Focus on the Selection for DAZ 4

Not Rated Yet



! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM

Add to Collection

0 Likes
Offered By
License
Extended Use License
This item comes with our Extended Use Licensing. This means that you may use the model for both non-commercial and commercial purposes, in a variety of mediums and applications.
For full license terms, see our 3D Content Licensing Agreement
Item Details
| Vendor: | AffectionX |
| Published: | Nov 22, 2026 |
| Download Size: | 5.7 KB |
| Software: | Daz Studio |
| dForce: | – |
Included Formats
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 4 |
Item Ratings

Not Rated Yet
Focus Picker - Camera Focus on the Selection for DAZ 4
Focus Picker sets a camera's focal distance to the item you have selected. Select a figure and the focus goes to its eyes; select a prop and it goes to the prop's center. No more guessing the Focal Distance value or measuring it by eye before a depth of field render.
Features
• Figures are focused on the eyes, props on their center, a selected bone on that bone.
• Pick the camera to adjust from a list of the cameras in the scene.
• Optionally switches Depth of Field on and sets the F/Stop in the same step.
• Shows the distance it set, so you can see what changed.
How to use
1. Select the target: a figure, a prop or a bone.
2. Run Focus Picker and pick the camera.
3. Optionally tick Depth of Field and enter an F/Stop.
4. Press "Focus".
Compatibility
• DAZ Studio 4 (Windows).
• Tested with a Genesis 9 figure: the camera's focal distance was set to the eyes, Depth of Field switched on at f/2.8, and Ctrl+Z restored the previous distance and f-stop.
• Every change is one Undo step.
Included
• One script (.dsa) and a ReadMe. Installs to Content Library > Scripts > AffectionX.
Features
• Figures are focused on the eyes, props on their center, a selected bone on that bone.
• Pick the camera to adjust from a list of the cameras in the scene.
• Optionally switches Depth of Field on and sets the F/Stop in the same step.
• Shows the distance it set, so you can see what changed.
How to use
1. Select the target: a figure, a prop or a bone.
2. Run Focus Picker and pick the camera.
3. Optionally tick Depth of Field and enter an F/Stop.
4. Press "Focus".
Compatibility
• DAZ Studio 4 (Windows).
• Tested with a Genesis 9 figure: the camera's focal distance was set to the eyes, Depth of Field switched on at f/2.8, and Ctrl+Z restored the previous distance and f-stop.
• Every change is one Undo step.
Included
• One script (.dsa) and a ReadMe. Installs to Content Library > Scripts > AffectionX.
Categories




















