
Lanolin 3D STL Model Garfield and Friends Figurine

Not Rated Yet





This Item Was Made Using

! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM

Add to Collection

0 Likes
Offered By
License
Personal Use Only License (IP Restricted)
This item comes with our Personal Use Only Licensing. This means you may not share this model or use it for any commercial purposes or in any way that involves an exchange of money, promotes a business entity, or otherwise results directly or indirectly in financial gain. In addition, because certain intellectual property depicted in this model may not be affiliated with or endorsed by the original rights holder, this model is subject to an Editorial Use Only Restriction which further limits the ways in which you may use this model.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | Bilen |
| Published: | Nov 14, 2026 |
| Download Size: | 15.7 MB |
| Made With AI: | Yes |
| Game Ready: | – |
| Polygons: | 720,182 |
| Print Ready: | Yes |
| 3D Scan: | – |
| Textures: | – |
| Materials: | – |
| UV Mapped: | – |
| PBR: | – |
| Rigged: | – |
| Animated: | – |
Included Formats
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 11 |
Item Ratings

Not Rated Yet
Lanolin 3D STL Model Garfield and Friends Figurine
Transform your 3D printing collection with this detailed Lanolin STL model, inspired by the classic U.S. Acres and Garfield and Friends animation series. Designed specifically for hobbyists and fans looking to create an amazing fan art sculpture.
• Product Type: Digital download only (STL file for 3D printing). No physical item will be shipped.
• Design Details: Sculpted specifically for FDM 3D printers, featuring rich depth, sharp textures, and volumetric detail without any flat 2D lines.
• Slicing Recommendations: For optimal structural strength and a clean finish, set wall layers to 3 or 4, and use an infill rate between 5% and 15% (gyroid infill recommended).
• Support Settings: Designed with printability in mind; use standard supports and remove delicate overhang supports carefully.
• Magnet Customization Note: If you plan to add magnets to the back side, please customize or create holes in your slicer based on the exact magnet size you wish to use (such as 10mm, 12mm, 15mm, 16mm, or 20mm round hobby magnets).
• Instant Access: The high-resolution STL file is available for download immediately after purchase so you can start printing right away.
• Product Type: Digital download only (STL file for 3D printing). No physical item will be shipped.
• Design Details: Sculpted specifically for FDM 3D printers, featuring rich depth, sharp textures, and volumetric detail without any flat 2D lines.
• Slicing Recommendations: For optimal structural strength and a clean finish, set wall layers to 3 or 4, and use an infill rate between 5% and 15% (gyroid infill recommended).
• Support Settings: Designed with printability in mind; use standard supports and remove delicate overhang supports carefully.
• Magnet Customization Note: If you plan to add magnets to the back side, please customize or create holes in your slicer based on the exact magnet size you wish to use (such as 10mm, 12mm, 15mm, 16mm, or 20mm round hobby magnets).
• Instant Access: The high-resolution STL file is available for download immediately after purchase so you can start printing right away.



















