Free 3D
3D Print Models
3D Scans
Animation & MoCap
Textures
Materials
Skin Reference
2D Game Assets
Sound Effects
Brushes & Tools
Reference Photos
Stock Images
HDR Images
3ds Max
Maya
Blender
Unreal Engine
Unity
ZBrush
Cinema 4D
LightWave
Marmoset
SketchUp
FBX
DAE
DXF
GLBHellBoy Action Figure 3D Model
Not Rated Yet
! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM
Add to Collection
0 Likes
Share This 3D Model
Offered By
3d designer since 2004, used programs ZBrusch, Solidworks, graduated from the Milan Polytechnic in 2001
Vendor's Pages
License
Extended Use License (IP Restricted)
This item comes with our Extended Use Licensing. This means that you may use the model in a variety of mediums and applications. But, because certain intellectual property depicted in this model may not be affiliated with or endorsed by the original rights holder, this model is subject to an Editorial Use Only Restriction which limits the ways in which you may use this model.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | Cody3D |
| Published: | Oct 24, 2019 |
| Download Size: | 543.8 MB |
| Game Ready: | – |
| Polygons: | 4,178 |
| Vertices: | 56,200 |
| Print Ready: | Yes |
| 3D Scan: | – |
| Textures: | – |
| Materials: | – |
| UV Mapped: | – |
| PBR: | – |
| Rigged: | – |
| Animated: | – |
Included Formats
Statistics
| Favorites: | 5 |
| Likes: | 0 |
| Views: | 900 |
Item Ratings
Not Rated Yet
HellBoy Action Figure 3D Model
STL file optimized for FDM-FFF DLP-SLA-SLS printing
HellBoy DC Comics Marvel Action Figures File STL 3D Printer
File STL, OBJ for 3 D Printer 1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS
more than 200 hours of modeling
two versions, long and short horns
however, the dimensions can be changed with each slicer
in total HellBoy and composed of 4,178 mil points
all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer
1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS
dimensions approximately FDM-FFF Z 31Cm X 12.5Cm Y 15Cm
Z 11.8inch X 4.9inch Y 5.9inch
dimensions approximately DLP-SLA-SLS Z 13Cm X 6.9Cm Y 7.1Cm
Z 5.1inch X 2.7inch Y 2.8inch
all files are already in place for optimal printing
HellBoy 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,
every part of the model in the most convenient way for you.
Each file has been checked and repaired with Netfabb
The parts of the model are already positioned for 3D printing
Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...
All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing
HELLBOY
Recommended settings for printing
each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Skin perimeter line count: 0
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of
the model s parts.
Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30 Deg
HellBoy DC Comics Marvel Action Figures File STL 3D Printer
File STL, OBJ for 3 D Printer 1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS
more than 200 hours of modeling
two versions, long and short horns
however, the dimensions can be changed with each slicer
in total HellBoy and composed of 4,178 mil points
all the files have been decimated by the polygons, but without losing the details, this makes the light files suitable for each computer
1:8 for FDM-FFF, 1:14 for DLP-SLA-SLS
dimensions approximately FDM-FFF Z 31Cm X 12.5Cm Y 15Cm
Z 11.8inch X 4.9inch Y 5.9inch
dimensions approximately DLP-SLA-SLS Z 13Cm X 6.9Cm Y 7.1Cm
Z 5.1inch X 2.7inch Y 2.8inch
all files are already in place for optimal printing
HellBoy 3D model was designed to get a clean print result, without considering printing material consumption, However, you are free to rotate, or scale,
every part of the model in the most convenient way for you.
Each file has been checked and repaired with Netfabb
The parts of the model are already positioned for 3D printing
Compatible with every Slicer- Simplify3D, Care, Slic3r, etc ...
All the parts of the model have been cut so as to be printed vertically, for a higher quality of printing
HELLBOY
Recommended settings for printing
each part was cut to be printed vertically, to have a better quality print, so for the upper parts,
it is recommended to print with a 4-5 skirt
Quality
Layer height: 0.1mm*
Initial layer thickness: 0.3mm
Bottom/top pattern: lines
Skin perimeter line count: 0
Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
*Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
As a STL file provider, our goal is to ensure that the files are error-free and printable in the most accurate way. This is why we only test print the most difficult segments of
the model s parts.
Speed setups:
Infill speed: 30mm/s
Outer shell speed : 30mm/s
Inner shell speed: 20mm/s
Top/bottom speed: 20mm/s
Support speed: 50mm/s
Travel speed: 150mm/s
Skirt speed: 30mm/s
Amount of slower layers: 4
Infill:
Infill pattern: Grid
Line distance: 1.5mm
Infill overlap: 20%
Infill layers: 0
Support:
Enable support: Check
Placement: Everywhere
Overhang angle: 30 Deg
