Rodin Coil STL 30 x 8 x 12 mm 12 Grooves 6 Left 6 Right 3D Model

STL MODEL – RODIN COIL 30 8 12 MM

Digital 3D model of a Rodin Coil with 6 LEFT + 6 RIGHT winding grooves, designed for 3D printing
━━━━━━━━━━━━━━━━━━━━

MODEL DESCRIPTION

Precisely designed digital STL model of a Rodin Coil with the following dimensions:
Outer diameter: 30 mm
Inner opening diameter: 8 mm
Total height: 12 mm
The model features a total of 12 guided winding grooves:
6 LEFT grooves
6 RIGHT grooves
Configuration: 2 6
Total number of channels: 12
The LEFT and RIGHT grooves run in opposite directions, creating the characteristic crossed geometry of the Rodin Coil.

⚠ IMPORTANT: This listing contains a DIGITAL STL FILE only.
No physical Rodin Coil, wire or printed object will be shipped.
━━━━━━━━━━━━━━━━━━━━

MODEL DIMENSIONS

Outer diameter: 30 mm
Inner opening diameter: 8 mm
Total height: 12 mm
Total number of grooves: 12
LEFT grooves: 6
RIGHT grooves: 6
Configuration: 2 6
File format: STL
━━━━━━━━━━━━━━━━━━━━

LEFT GROOVES
Number of grooves: 6
Width: 1.1 mm
Depth: 1.2 mm
Direction: LEFT
━━━━━━━━━━━━━━━━━━━━
RIGHT GROOVES

Number of grooves: 6
Width: 1.1 mm
Depth: 2.3 mm
Direction: RIGHT
The difference in depth between the LEFT and RIGHT grooves is intentionally built directly into the model geometry.
Together, the two opposite winding directions create the complete 6L + 6R / 2 6 configuration.
━━━━━━━━━━━━━━━━━━━━

MODEL CONSTRUCTION

✔ Full, one-piece Rodin Coil model
✔ Compact dimensions: 30 8 12 mm
✔ 12 guided winding channels
✔ 6 LEFT + 6 RIGHT
✔ 2 6 configuration
✔ Two opposite winding directions
✔ LEFT grooves: 1.1 1.2 mm
✔ RIGHT grooves: 1.1 2.3 mm
✔ Geometry prepared for 3D printing
✔ STL file format
━━━━━━━━━━━━━━━━━━━━

⚙ DESIGNED FOR 3D PRINTING
Before printing, verify:
• Model dimensions
• Nozzle diameter
• Layer height
• Dimensional calibration
• Extrusion settings
• Groove reproduction in the slicer preview
• Printing orientation
Because this is a compact model with 1.1 mm wide winding grooves, accurate printer calibration is recommended.
━━━━━━━━━━━━━━━━━━━━

APPLICATIONS

Rodin Coil projects
2 6 winding configuration
DIY projects
Prototyping
Toroidal geometry experiments
Educational and demonstration models
Manual wire routing according to the model geometry
━━━━━━━━━━━━━━━━━━━━

WHAT YOU RECEIVE

✔ Digital STL file
✔ Rodin Coil model 30 8 12 mm
✔ 12 guided winding grooves
✔ 6 LEFT + 6 RIGHT
✔ 2 6 configuration
✔ LEFT grooves: 1.1 1.2 mm
✔ RIGHT grooves: 1.1 2.3 mm
✔ Model ready for preparation in your slicer
No finished physical Rodin Coil
No physical 3D print
No copper wire
No electronic components
No physical product will be shipped
━━━━━━━━━━━━━━━━━━━━

⚠ IMPORTANT – DIGITAL PRODUCT

This is a digital STL product intended for 3D printing.
After purchase, you will receive a digital STL file for download.
Before purchase, verify the model dimensions and compatibility with your 3D printer.
Final print quality depends on the printer, material, calibration and slicer settings.
━━━━━━━━━━━━━━━━━━━━

LICENSE

The STL file is intended for personal use only.
Purchase does not transfer copyright or ownership of the design.
Reselling, sharing, copying, redistributing or publishing the STL file or modified versions without the author's permission is prohibited.
Selling physical prints, coils or products made from this model requires a separate commercial license.
Full license terms are included in:
CrownchakraPL_License_PL_EN.pdf
CrownchakraPL – All Rights Reserved
━━━━━━━━━━━━━━━━━━━━

RODIN COIL STL | 30 8 12 MM | 12 GROOVES | 6L + 6R
Configuration: 2 6
LEFT: 1.1 1.2 mm
RIGHT: 1.1 2.3 mm
12 guided winding grooves
Digital 3D printable STL model