3D Models
3D Print Models
3D Scans
Animation & MoCap
Textures
Materials
Skin Textures
2D Game Assets
Sound Effects
Brushes & Tools
Reference Photos
Stock Images
HDR Images
3ds Max
Maya
Blender
Unreal Engine
Unity
ZBrush
Cinema 4D
LightWave
Marmoset
SketchUp
FBX
DAE
DXF
GLB
Submit Your RenderATU-100 HF Auto Tuner 1.8Mhz - 30Mhz
Not Rated Yet
! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM
Add to Collection
3 Likes
Share This Daz Content
Offered By
License
Extended Use License (IP Restricted)
This item comes with our Extended Use Licensing. This means that you may use the model in a variety of mediums and applications. But, because certain intellectual property depicted in this model may not be affiliated with or endorsed by the original rights holder, this model is subject to an Editorial Use Only Restriction which limits the ways in which you may use this model.
For full license terms, see our 3D Content Licensing Agreement
Item Details
| Vendor: | GMArtworks |
| Published: | Feb 15, 2025 |
| Download Size: | 192.1 MB |
| Software: | Daz Studio |
| dForce: | – |
Statistics
| Favorites: | 0 |
| Likes: | 3 |
| Views: | 97 |
Item Ratings
Not Rated Yet
ATU-100 HF Auto Tuner 1.8Mhz - 30Mhz
ATU-100 HF Auto Tuner 1.8Mhz - 30Mhz (Daz Studio)
I recently purchased an ATU-100 for my Boomerang (A) CB Antenna. I though I would give it a try!
The unit was ordered from ###### and it arrived very quickly, thanks!
First impressions were very good, the unit seems to be well made with a very robust case. I soon had power connected (12V) and the antenna coax cable to the radio. For the initial tests I had the Anytone5555 transceiver connected. With the tuner on and in "Auto" mode a carrier of 5W produced almost instant, and very quiet, tuning on all bands. Initial impressions were great!
The unit I have came with firmware version 3.2, looks like most users are happy with this versions, versions before 3.0 had a few issues. I love the digital readout that gives you power, SWR while tuning and then shows you the inductance (L) and capacitance (C) needed to tune the antenna, impressive!
I opened up the tuner to look at the build quality and components inside, again I was pleasantly surprised, everything seems well made with really good solder joints, unlike some equipment I have seen like MFJ where I normally end up redoing most of the solder joints.
I spent the next few days using it with a few different radios and antennas, the tuning was always quick and produced a very low SWR. The power output, SWR and efficiency display on the little screen is also useful. Overall the tuner works really well!
Specs:
Power supply voltage: 10-15VDC
Maximum current consumption: 400mA
Maximum working power: 100W
Maximum possible measured power: 150W
Minimum power required to start tuning: 5W
Minimum possible measured power: 0.1W
Measurement steps for power 10W: 0.1W
Measurement steps for power 10W: 1W
Power measurement accuracy: 10%
Maximum installed inductance: 8.53uh
Minimum installed inductance step: 0.05uh
Maximum installed capacitance: 1869pf
Minimum installed capacitance step size: 10PF
Number of panel buttons: power, direct, automatic, functional
Display: 0.91 led
Color: black
Material: aluminum alloy
I recently purchased an ATU-100 for my Boomerang (A) CB Antenna. I though I would give it a try!
The unit was ordered from ###### and it arrived very quickly, thanks!
First impressions were very good, the unit seems to be well made with a very robust case. I soon had power connected (12V) and the antenna coax cable to the radio. For the initial tests I had the Anytone5555 transceiver connected. With the tuner on and in "Auto" mode a carrier of 5W produced almost instant, and very quiet, tuning on all bands. Initial impressions were great!
The unit I have came with firmware version 3.2, looks like most users are happy with this versions, versions before 3.0 had a few issues. I love the digital readout that gives you power, SWR while tuning and then shows you the inductance (L) and capacitance (C) needed to tune the antenna, impressive!
I opened up the tuner to look at the build quality and components inside, again I was pleasantly surprised, everything seems well made with really good solder joints, unlike some equipment I have seen like MFJ where I normally end up redoing most of the solder joints.
I spent the next few days using it with a few different radios and antennas, the tuning was always quick and produced a very low SWR. The power output, SWR and efficiency display on the little screen is also useful. Overall the tuner works really well!
Specs:
Power supply voltage: 10-15VDC
Maximum current consumption: 400mA
Maximum working power: 100W
Maximum possible measured power: 150W
Minimum power required to start tuning: 5W
Minimum possible measured power: 0.1W
Measurement steps for power 10W: 0.1W
Measurement steps for power 10W: 1W
Power measurement accuracy: 10%
Maximum installed inductance: 8.53uh
Minimum installed inductance step: 0.05uh
Maximum installed capacitance: 1869pf
Minimum installed capacitance step size: 10PF
Number of panel buttons: power, direct, automatic, functional
Display: 0.91 led
Color: black
Material: aluminum alloy
Categories
