Free 3D
3D Print Models
3D Scans
Animation & MoCap
Textures
Materials
Skin Reference
2D Game Assets
Sound Effects
Brushes & Tools
Reference Photos
Stock Images
HDR Images
3ds Max
Maya
Blender
Unreal Engine
Unity
ZBrush
Cinema 4D
LightWave
Marmoset
SketchUp
FBX
DAE
DXF
GLBWork Sharp Precision Adjust Clamp/Holder With Support Block 3D Model
Not Rated Yet
! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM
Add to Collection
0 Likes
Share This 3D Model
Offered By
License
Personal Use Only License
This item comes with our Personal Use Only Licensing. This means you may not share this model or use it for any commercial purposes or in any way that involves an exchange of money, promotes a business entity, or otherwise results directly or indirectly in financial gain.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | Luheadr |
| Published: | Jan 17, 2025 |
| Download Size: | 2.2 MB |
| Game Ready: | – |
| Polygons: | 13,532 |
| Vertices: | 6,764 |
| Print Ready: | Yes |
| 3D Scan: | – |
| Textures: | – |
| Materials: | – |
| UV Mapped: | – |
| PBR: | – |
| Rigged: | – |
| Animated: | – |
Included Formats
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 226 |
Item Ratings
Not Rated Yet
Work Sharp Precision Adjust Clamp/Holder With Support Block 3D Model
The clamp currently comes in three mouth sizes, 25mm, 40mm and 60mm, with different length screws to fit. The support block is the same for all sizes and is guided in to place through the geometry of the clamp. If you need another size message me.
Be sure to use the suggested print orientations since the model is designed to be printed that way.
Print instructions:
1. Orient the pieces and add supports as shown in photos 4 and 5(paint on supports with smart fill is good for this).
2. The stock 0.2mm profile and changing perimeters to 4 and infill to 35% worked well on my Prusa mini in both PLA and PETG. Up these values if you want a more solid clamp.
If you have any questions or requests let me know!
Be sure to use the suggested print orientations since the model is designed to be printed that way.
Print instructions:
1. Orient the pieces and add supports as shown in photos 4 and 5(paint on supports with smart fill is good for this).
2. The stock 0.2mm profile and changing perimeters to 4 and infill to 35% worked well on my Prusa mini in both PLA and PETG. Up these values if you want a more solid clamp.
If you have any questions or requests let me know!
