Printable Metal Locker Set, All Scales Pack, 12 Models 3D Model

Not Rated Yet










! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM

Add to Collection

0 Likes
Offered By
License
Extended Use License
This item comes with our Extended Use Licensing. This means that you may use the model for both non-commercial and commercial purposes, in a variety of mediums and applications.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | sau3d |
| Published: | Nov 10, 2026 |
| Download Size: | 852.8 KB |
| Game Ready: | – |
| Polygons: | 13,872 |
| Vertices: | 6,960 |
| Print Ready: | Yes |
| 3D Scan: | – |
| Textures: | – |
| Materials: | – |
| UV Mapped: | – |
| PBR: | – |
| Rigged: | – |
| Animated: | – |
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 19 |
Item Ratings

Not Rated Yet
Printable Metal Locker Set, All Scales Pack, 12 Models 3D Model
Printable industrial metal locker set, all scales pack: 3 items in each of 4 scales (1:24, 1:48 O, 1:87 HO and 1:160 N, 12 models in total). Includes 1-Bay single locker, 2-Bay double locker bank and 3-Bay triple locker bank, built from real commercial locker specifications for RC garages, workshops, factory interiors and model railway dioramas.
DETAILS
- Three industrial locker configurations built from real commercial locker specifications (1900 mm height, 380 mm bay width, 450 mm depth): 1-Bay Single Locker, 2-Bay Double Locker Bank and 3-Bay Triple Locker Bank
- Full door detailing on every bay: top and bottom ventilation louver clusters, recessed handle pocket, three knuckle hinges and V-profile door seam grooves
- Embossed door number / card holder plate on 1:24 and 1:48 scales (omitted on HO and N where it falls below the nozzle minimum)
- Support-free base with integrated front kick-plate apron and 100 mm corner legs, resting flat on Z = 0
- No brand, marking or logo, ready to prime, paint and weather for garages, workshops, depots, factories and railway interiors
SCALES IN THIS PACK
- 1:24 scale: 3 items (1-Bay, 2-Bay and 3-Bay)
- 1:48 scale: 3 items (1-Bay, 2-Bay and 3-Bay)
- HO scale (1:87): 3 items (1-Bay, 2-Bay and 3-Bay)
- N scale (1:160): 3 items (1-Bay, 2-Bay and 3-Bay)
SIZES PER SCALE (L X W X H)
- 1:24 scale: 1-Bay Single Locker 15.8 x 18.9 x 79.2 mm; 2-Bay Double Locker Bank 31.7 x 18.9 x 79.2 mm; 3-Bay Triple Locker Bank 47.5 x 18.9 x 79.2 mm
- 1:48 scale: 1-Bay Single Locker 7.9 x 9.6 x 39.6 mm; 2-Bay Double Locker Bank 15.8 x 9.6 x 39.6 mm; 3-Bay Triple Locker Bank 23.8 x 9.6 x 39.6 mm
- HO scale (1:87): 1-Bay Single Locker 4.4 x 5.3 x 21.8 mm; 2-Bay Double Locker Bank 8.7 x 5.3 x 21.8 mm; 3-Bay Triple Locker Bank 13.1 x 5.3 x 21.8 mm
- N scale (1:160): 1-Bay Single Locker 2.4 x 2.9 x 11.9 mm; 2-Bay Double Locker Bank 4.8 x 2.9 x 11.9 mm; 3-Bay Triple Locker Bank 7.1 x 2.9 x 11.9 mm
FILES
Each size and scale as STL, 3MF (print settings saved inside) and STEP: 36 model files, plus one README per scale and an overview README with every size.
PRINTING
No supports needed. Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically).
Use a 3 mm brim (already set in the 3MF; with the STL, add it in your slicer): tall narrow parts stick better.
Every model in every scale fits a 180 mm print bed. Print settings, print times and resin details are listed below and in the README of each scale inside the ZIP.
Need another size or a new design? Message me on the platform for a custom size or a custom design.
PRINT SETTINGS (FDM)
- Supports: OFF, none needed in any scale (no overhang steeper than 45 degrees)
- Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically). The 3MF already opens with supports off.
- Orientation: standing upright (base on the bed), as in the file.
- Layer height (recommended): 1:24: 0.20 mm; 1:48: 0.16 mm; HO, N: 0.12 mm; 0.20 mm also works (faster)
- Brim: 3 mm (already set in the 3MF; add it in your slicer when you print the STL)
- Nozzle 0.4 mm, first layer 0.2 mm; walls 2-3, infill 15-20 %
- Material: PLA recommended; PETG also works
PRINT TIME AND FILAMENT PER SCALE (FDM, 3 CONFIGURATIONS PER SCALE)
- 1:24 scale: 3 items, about 1 h 05 min to 1 h 25 min each, 9.9 to 24.0 g each
- 1:48 scale: 3 items, about 30 min to 45 min each, 3.0 to 4.3 g each
- HO scale (1:87): 3 items, about 10 min to 30 min each, 0.7 to 1.9 g each
- N scale (1:160): 3 items, about 5 min to 5 min each, 0.1 to 0.3 g each
Approximate, on a modern fast printer (PLA, 3 walls, 15 % infill). Older or slower printers take about 1.3 to 1.5 times longer; filament use stays about the same.
RESIN (MSLA)
Also printable in every scale on a standard 128 x 81 mm resin plate: use your usual supports and tilt, and hollow the larger 1:24 models in your slicer to save resin. Per-item resin times and ml are in the README of each scale inside the ZIP.
USE
Scale models for display, not toys. Paint as you like.
DETAILS
- Three industrial locker configurations built from real commercial locker specifications (1900 mm height, 380 mm bay width, 450 mm depth): 1-Bay Single Locker, 2-Bay Double Locker Bank and 3-Bay Triple Locker Bank
- Full door detailing on every bay: top and bottom ventilation louver clusters, recessed handle pocket, three knuckle hinges and V-profile door seam grooves
- Embossed door number / card holder plate on 1:24 and 1:48 scales (omitted on HO and N where it falls below the nozzle minimum)
- Support-free base with integrated front kick-plate apron and 100 mm corner legs, resting flat on Z = 0
- No brand, marking or logo, ready to prime, paint and weather for garages, workshops, depots, factories and railway interiors
SCALES IN THIS PACK
- 1:24 scale: 3 items (1-Bay, 2-Bay and 3-Bay)
- 1:48 scale: 3 items (1-Bay, 2-Bay and 3-Bay)
- HO scale (1:87): 3 items (1-Bay, 2-Bay and 3-Bay)
- N scale (1:160): 3 items (1-Bay, 2-Bay and 3-Bay)
SIZES PER SCALE (L X W X H)
- 1:24 scale: 1-Bay Single Locker 15.8 x 18.9 x 79.2 mm; 2-Bay Double Locker Bank 31.7 x 18.9 x 79.2 mm; 3-Bay Triple Locker Bank 47.5 x 18.9 x 79.2 mm
- 1:48 scale: 1-Bay Single Locker 7.9 x 9.6 x 39.6 mm; 2-Bay Double Locker Bank 15.8 x 9.6 x 39.6 mm; 3-Bay Triple Locker Bank 23.8 x 9.6 x 39.6 mm
- HO scale (1:87): 1-Bay Single Locker 4.4 x 5.3 x 21.8 mm; 2-Bay Double Locker Bank 8.7 x 5.3 x 21.8 mm; 3-Bay Triple Locker Bank 13.1 x 5.3 x 21.8 mm
- N scale (1:160): 1-Bay Single Locker 2.4 x 2.9 x 11.9 mm; 2-Bay Double Locker Bank 4.8 x 2.9 x 11.9 mm; 3-Bay Triple Locker Bank 7.1 x 2.9 x 11.9 mm
FILES
Each size and scale as STL, 3MF (print settings saved inside) and STEP: 36 model files, plus one README per scale and an overview README with every size.
PRINTING
No supports needed. Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically).
Use a 3 mm brim (already set in the 3MF; with the STL, add it in your slicer): tall narrow parts stick better.
Every model in every scale fits a 180 mm print bed. Print settings, print times and resin details are listed below and in the README of each scale inside the ZIP.
Need another size or a new design? Message me on the platform for a custom size or a custom design.
PRINT SETTINGS (FDM)
- Supports: OFF, none needed in any scale (no overhang steeper than 45 degrees)
- Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically). The 3MF already opens with supports off.
- Orientation: standing upright (base on the bed), as in the file.
- Layer height (recommended): 1:24: 0.20 mm; 1:48: 0.16 mm; HO, N: 0.12 mm; 0.20 mm also works (faster)
- Brim: 3 mm (already set in the 3MF; add it in your slicer when you print the STL)
- Nozzle 0.4 mm, first layer 0.2 mm; walls 2-3, infill 15-20 %
- Material: PLA recommended; PETG also works
PRINT TIME AND FILAMENT PER SCALE (FDM, 3 CONFIGURATIONS PER SCALE)
- 1:24 scale: 3 items, about 1 h 05 min to 1 h 25 min each, 9.9 to 24.0 g each
- 1:48 scale: 3 items, about 30 min to 45 min each, 3.0 to 4.3 g each
- HO scale (1:87): 3 items, about 10 min to 30 min each, 0.7 to 1.9 g each
- N scale (1:160): 3 items, about 5 min to 5 min each, 0.1 to 0.3 g each
Approximate, on a modern fast printer (PLA, 3 walls, 15 % infill). Older or slower printers take about 1.3 to 1.5 times longer; filament use stays about the same.
RESIN (MSLA)
Also printable in every scale on a standard 128 x 81 mm resin plate: use your usual supports and tilt, and hollow the larger 1:24 models in your slicer to save resin. Per-item resin times and ml are in the README of each scale inside the ZIP.
USE
Scale models for display, not toys. Paint as you like.
























