Printable Warehouse Kit All Scales Pack 108 Models 3D Model

Not Rated Yet













! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM

Add to Collection

0 Likes
Offered By
License
Extended Use License
This item comes with our Extended Use Licensing. This means that you may use the model for both non-commercial and commercial purposes, in a variety of mediums and applications.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | sau3d |
| Published: | Nov 10, 2026 |
| Download Size: | 10.5 MB |
| Game Ready: | – |
| Polygons: | 259,180 |
| Vertices: | 128,986 |
| Print Ready: | Yes |
| 3D Scan: | – |
| Textures: | – |
| Materials: | – |
| UV Mapped: | – |
| PBR: | – |
| Rigged: | – |
| Animated: | – |
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 27 |
Item Ratings

Not Rated Yet
Printable Warehouse Kit All Scales Pack 108 Models 3D Model
Printable warehouse and yard kit, all scales pack: 108 models, every item in N, TT, HO, OO, S, 1:50, O, 1:10 (RC 1:10 without the pallets). Four pallets, a 1000 L IBC tote, three drums, three wooden crates and three cable reels, built from real sizes; they match my shipping containers in scale and look.
DETAILS
- Four pallets with their real board layout: Euro-size 1200 x 800 mm, half pallet 800 x 600 mm, US-size 48 x 40 in (stringer type) and a plastic pallet
- Open fork openings on every pallet; in N and TT they are recesses (too small to print open)
- Deck board gaps open where they are wide enough to print, otherwise shown as grooves
- 1000 L IBC tote with its steel cage, filler cap, outlet valve and pallet base (open cage at 1:10, a raised cage grid in the diorama scales)
- 200 L steel drums with closed head (2 bungs) and open head (clamp ring), and a 220 L plastic drum
- Three wooden crates on pallet footprints (600 x 400, 800 x 600, 1200 x 800 mm) with corner cleats (board grooves from HO up)
- Three cable reels (500, 1000 and 1600 mm flanges), printed as full reels
- No brand, marking or logo, so you can paint and weather them your way
SCALES IN THIS PACK
- N scale (1:160): 14 items
- TT scale (1:120): 14 items
- HO scale (1:87): 14 items
- OO scale (1:76.2): 14 items
- S scale (1:64): 14 items
- 1:50 scale: 14 items
- O scale (1:48): 14 items
- RC scale 1:10: 10 items
SIZES PER SCALE (L X W X H)
- N scale (1:160): IBC tote 7.5 x 6.2 x 7.2 mm; item sizes 3.1 to 10.0 mm (largest side)
- TT scale (1:120): IBC tote 10.0 x 8.3 x 9.7 mm; item sizes 4.2 to 13.3 mm (largest side)
- HO scale (1:87): IBC tote 13.8 x 11.5 x 13.3 mm; item sizes 5.7 to 18.4 mm (largest side)
- OO scale (1:76.2): IBC tote 15.7 x 13.1 x 15.2 mm; item sizes 6.6 to 21.0 mm (largest side)
- S scale (1:64): IBC tote 18.8 x 15.6 x 18.1 mm; item sizes 7.8 to 25.0 mm (largest side)
- 1:50 scale: IBC tote 24.0 x 20.0 x 23.2 mm; item sizes 10.0 to 32.0 mm (largest side)
- O scale (1:48): IBC tote 25.0 x 20.8 x 24.2 mm; item sizes 10.4 to 33.3 mm (largest side)
- RC scale 1:10: IBC tote 120.0 x 100.0 x 116.0 mm; item sizes 50 to 160 mm (largest side)
Every size of every item: the README of each scale inside the ZIP.
FILES
Each item and scale as STL, 3MF (print settings saved inside) and STEP: 324 model files, plus one README per scale and an overview README with every size.
PRINTING
No supports needed. Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically).
Use a 2 mm brim in the diorama scales (already set in the 3MF); no brim at 1:10.
Every item fits a 180 mm print bed. Print settings and print times are listed below. Resin details for every item are in the README of each scale inside the ZIP.
Need another size or a new design? Message me on the platform for a custom size or a custom design.
PRINT SETTINGS (FDM)
- Supports: OFF, none needed in any scale (no overhang steeper than 45 degrees)
- Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically). The 3MF already opens with supports off.
- Orientation: as in the file - pallets upside down (top deck on the bed); the IBC tote, drums, crates and cable reels standing upright.
- Layer height (recommended): N, TT, HO, OO: 0.12 mm; S: 0.16 mm; 1:50, O, 1:10: 0.20 mm; 0.20 mm also works (faster)
- Brim: 2 mm in the diorama scales (already set in the 3MF), none at 1:10
- Nozzle 0.4 mm, first layer 0.2 mm; walls 2-3, infill 15-20 %
- Material: PLA recommended; PETG also works
PRINT TIME AND FILAMENT PER SCALE (FDM, EVERY ITEM OF THE SCALE)
- N scale (1:160): 14 items, about 5 min to 10 min each, 0.0 to 0.6 g each
- TT scale (1:120): 14 items, about 5 min to 15 min each, 0.1 to 1.0 g each
- HO scale (1:87): 14 items, about 5 min to 20 min each, 0.1 to 1.5 g each
- OO scale (1:76.2): 14 items, about 5 min to 25 min each, 0.1 to 2.0 g each
- S scale (1:64): 14 items, about 5 min to 25 min each, 0.1 to 3.1 g each
- 1:50 scale: 14 items, about 5 min to 30 min each, 0.2 to 6.0 g each
- O scale (1:48): 14 items, about 5 min to 30 min each, 0.3 to 6.6 g each
- RC scale 1:10: 10 items, about 1 h 25 min to 20 h 10 min each, 19.4 to 406.2 g each
Approximate, on a modern fast printer (PLA). Times, filament and resin for every item: the README of each scale inside the ZIP.
USE
Scale models for display, not toys. Paint as you like.
DETAILS
- Four pallets with their real board layout: Euro-size 1200 x 800 mm, half pallet 800 x 600 mm, US-size 48 x 40 in (stringer type) and a plastic pallet
- Open fork openings on every pallet; in N and TT they are recesses (too small to print open)
- Deck board gaps open where they are wide enough to print, otherwise shown as grooves
- 1000 L IBC tote with its steel cage, filler cap, outlet valve and pallet base (open cage at 1:10, a raised cage grid in the diorama scales)
- 200 L steel drums with closed head (2 bungs) and open head (clamp ring), and a 220 L plastic drum
- Three wooden crates on pallet footprints (600 x 400, 800 x 600, 1200 x 800 mm) with corner cleats (board grooves from HO up)
- Three cable reels (500, 1000 and 1600 mm flanges), printed as full reels
- No brand, marking or logo, so you can paint and weather them your way
SCALES IN THIS PACK
- N scale (1:160): 14 items
- TT scale (1:120): 14 items
- HO scale (1:87): 14 items
- OO scale (1:76.2): 14 items
- S scale (1:64): 14 items
- 1:50 scale: 14 items
- O scale (1:48): 14 items
- RC scale 1:10: 10 items
SIZES PER SCALE (L X W X H)
- N scale (1:160): IBC tote 7.5 x 6.2 x 7.2 mm; item sizes 3.1 to 10.0 mm (largest side)
- TT scale (1:120): IBC tote 10.0 x 8.3 x 9.7 mm; item sizes 4.2 to 13.3 mm (largest side)
- HO scale (1:87): IBC tote 13.8 x 11.5 x 13.3 mm; item sizes 5.7 to 18.4 mm (largest side)
- OO scale (1:76.2): IBC tote 15.7 x 13.1 x 15.2 mm; item sizes 6.6 to 21.0 mm (largest side)
- S scale (1:64): IBC tote 18.8 x 15.6 x 18.1 mm; item sizes 7.8 to 25.0 mm (largest side)
- 1:50 scale: IBC tote 24.0 x 20.0 x 23.2 mm; item sizes 10.0 to 32.0 mm (largest side)
- O scale (1:48): IBC tote 25.0 x 20.8 x 24.2 mm; item sizes 10.4 to 33.3 mm (largest side)
- RC scale 1:10: IBC tote 120.0 x 100.0 x 116.0 mm; item sizes 50 to 160 mm (largest side)
Every size of every item: the README of each scale inside the ZIP.
FILES
Each item and scale as STL, 3MF (print settings saved inside) and STEP: 324 model files, plus one README per scale and an overview README with every size.
PRINTING
No supports needed. Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically).
Use a 2 mm brim in the diorama scales (already set in the 3MF); no brim at 1:10.
Every item fits a 180 mm print bed. Print settings and print times are listed below. Resin details for every item are in the README of each scale inside the ZIP.
Need another size or a new design? Message me on the platform for a custom size or a custom design.
PRINT SETTINGS (FDM)
- Supports: OFF, none needed in any scale (no overhang steeper than 45 degrees)
- Make sure supports are switched OFF in your slicer before slicing (some slicers turn them on automatically). The 3MF already opens with supports off.
- Orientation: as in the file - pallets upside down (top deck on the bed); the IBC tote, drums, crates and cable reels standing upright.
- Layer height (recommended): N, TT, HO, OO: 0.12 mm; S: 0.16 mm; 1:50, O, 1:10: 0.20 mm; 0.20 mm also works (faster)
- Brim: 2 mm in the diorama scales (already set in the 3MF), none at 1:10
- Nozzle 0.4 mm, first layer 0.2 mm; walls 2-3, infill 15-20 %
- Material: PLA recommended; PETG also works
PRINT TIME AND FILAMENT PER SCALE (FDM, EVERY ITEM OF THE SCALE)
- N scale (1:160): 14 items, about 5 min to 10 min each, 0.0 to 0.6 g each
- TT scale (1:120): 14 items, about 5 min to 15 min each, 0.1 to 1.0 g each
- HO scale (1:87): 14 items, about 5 min to 20 min each, 0.1 to 1.5 g each
- OO scale (1:76.2): 14 items, about 5 min to 25 min each, 0.1 to 2.0 g each
- S scale (1:64): 14 items, about 5 min to 25 min each, 0.1 to 3.1 g each
- 1:50 scale: 14 items, about 5 min to 30 min each, 0.2 to 6.0 g each
- O scale (1:48): 14 items, about 5 min to 30 min each, 0.3 to 6.6 g each
- RC scale 1:10: 10 items, about 1 h 25 min to 20 h 10 min each, 19.4 to 406.2 g each
Approximate, on a modern fast printer (PLA). Times, filament and resin for every item: the README of each scale inside the ZIP.
USE
Scale models for display, not toys. Paint as you like.
























