Free 3D
3D Print Models
3D Scans
Animation & MoCap
Textures
Materials
Skin Reference
2D Game Assets
Sound Effects
Brushes & Tools
Reference Photos
Stock Images
HDR Images
3ds Max
Maya
Blender
Unreal Engine
Unity
ZBrush
Cinema 4D
LightWave
Marmoset
SketchUp
FBX
DAE
DXF
GLBMach Lander Replica Print Ready + Source Files 3D Model
Not Rated Yet
! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM
Add to Collection
0 Likes
Share This 3D Model
Offered By
making game-ready models in blender
Vendor's Pages
License
Extended Use License (IP Restricted)
This item comes with our Extended Use Licensing. This means that you may use the model in a variety of mediums and applications. But, because certain intellectual property depicted in this model may not be affiliated with or endorsed by the original rights holder, this model is subject to an Editorial Use Only Restriction which limits the ways in which you may use this model.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | soundsbeard |
| Published: | Sep 10, 2025 |
| Download Size: | 282.9 MB |
| Game Ready: | – |
| Polygons: | 5,879,776 |
| Vertices: | 2,939,948 |
| Print Ready: | Yes |
| 3D Scan: | – |
| Textures: | – |
| Materials: | – |
| UV Mapped: | – |
| PBR: | – |
| Rigged: | – |
| Animated: | – |
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 119 |
Item Ratings
Not Rated Yet
Mach Lander Replica Print Ready + Source Files 3D Model
all my links: [flow.page/da-da](da-da)
Mach Lander
from The Brave Fighter of Legend Da-Garn
replica
the $30 archive contains 2 folders:
- a folder with the full set of print-ready parts which were redesigned to make the assembly easier
- a folder with the full set of print-ready parts which are fully compatible with the original toy
plus
- contains .blend file with source lowpoly parts (modifiers are on but not applied, it will allow to modify models as you want)
assembly.pdf
drive.google com/file/d/1ze5SqHVsTilc9H2qX2mKbOQFVxAvAWzU/view?usp=drive_link
to assemble the toy you will need some additional things which you can see on the attached image (for more details please download assembly.pdf):
- 2 pins which contain small nails which are suitable to hold front wheels
- 2 metal spikes 2.2x29mm and 2.2x51mm (hard 2.2mm metal wire will be ok)
- an M3 screw (3x18mm) and a nut for it
- 7 pieces of 5.5mm screws
- 2 screws with a wide head, 5mm long
recommended printing settings:
- every part already has the correct position for printing (the main part will have a lot of support but it is necessary to print the face of the toy correctly and avoid any skewing, if the main part will be somehow skewed. then other parts will look misplaced after the assembly)
- it was tested in ABS and PLA
- layer height: 0.1
- infill density: 5%
- support: only touching buildplate
- support pattern: Concentric
- support density: 20%
- buildplate adhesion type: raft
Mach Lander
from The Brave Fighter of Legend Da-Garn
replica
the $30 archive contains 2 folders:
- a folder with the full set of print-ready parts which were redesigned to make the assembly easier
- a folder with the full set of print-ready parts which are fully compatible with the original toy
plus
- contains .blend file with source lowpoly parts (modifiers are on but not applied, it will allow to modify models as you want)
assembly.pdf
drive.google com/file/d/1ze5SqHVsTilc9H2qX2mKbOQFVxAvAWzU/view?usp=drive_link
to assemble the toy you will need some additional things which you can see on the attached image (for more details please download assembly.pdf):
- 2 pins which contain small nails which are suitable to hold front wheels
- 2 metal spikes 2.2x29mm and 2.2x51mm (hard 2.2mm metal wire will be ok)
- an M3 screw (3x18mm) and a nut for it
- 7 pieces of 5.5mm screws
- 2 screws with a wide head, 5mm long
recommended printing settings:
- every part already has the correct position for printing (the main part will have a lot of support but it is necessary to print the face of the toy correctly and avoid any skewing, if the main part will be somehow skewed. then other parts will look misplaced after the assembly)
- it was tested in ABS and PLA
- layer height: 0.1
- infill density: 5%
- support: only touching buildplate
- support pattern: Concentric
- support density: 20%
- buildplate adhesion type: raft
