
Guanelfi Estela GT Electric Grand Tourer 3D Model

Not Rated Yet












This Item Was Made Using

! REPORT
NOTE: DIGITAL DOWNLOAD, NOT A PHYSICAL ITEM

Add to Collection

0 Likes
Offered By
License
Extended Use License
This item comes with our Extended Use Licensing. This means that you may use the model for both non-commercial and commercial purposes, in a variety of mediums and applications.
For full license terms, see our 3D Content Licensing Agreement
3D Model Details
| Vendor: | TopTrono 3D |
| Published: | Nov 12, 2026 |
| Download Size: | 51.5 MB |
| Made With AI: | Yes |
| Game Ready: | Yes |
| Polygons: | 54,095 |
| Vertices: | 55,981 |
| Print Ready: | – |
| 3D Scan: | – |
| Textures: | Yes |
| Materials: | Yes |
| UV Mapped: | Yes |
| PBR: | Yes |
| Rigged: | – |
| Animated: | Yes |
Statistics
| Favorites: | 0 |
| Likes: | 0 |
| Views: | 25 |
Item Ratings

Not Rated Yet
Guanelfi Estela GT Electric Grand Tourer 3D Model
Guanelfi Estela GT is an original 2+2 electric grand tourer coupe with a long tail. The car is a fictional design.
The exterior has rear-hinged coach doors without a visible centre pillar, a continuous tinted glass roof that runs from the windshield to the tail, and full-width light blades at the front and at the rear that are built from segments. In the default colourway the paint is two-tone: a deep pearl garnet upper body, a satin champagne lower body and satin bronze details. The car stands on 21/22 inch turbine wheels with visible brake discs and calipers. The four-seat interior is visible through the glass. It is finished in light leather and has a floating centre console and an ambient light strip.
Ten animation clips at 30 fps move the mechanisms: Door_L_Open, Door_R_Open, Hood_Open, Liftgate_Open, Spoiler_Deploy, Spoiler_AirBrake, ChargePort_Open, Steering, Wheels_Spin (loop), Lights_Welcome. The front hood opens over a storage tub, the glass liftgate opens, the active rear spoiler rises and tilts as an air brake, the charge-port lid opens, the front wheels steer, the wheels spin, the steering wheel turns and the light blades play a welcome sequence. The model needs no bones and no drivers, because every moving part hangs on a pivot object in a rigid hierarchy under one root.
The model is built to real-world scale, where 1 unit is 1 metre. It is 5.08 m long, 1.99 m wide without mirrors and 1.28 m high, and it has a wheelbase of 3.05 m. Three levels of detail are included as separate objects with the suffixes _LOD0, _LOD1 and _LOD2. LOD0 has 104,987 triangles, LOD1 has 39,203 triangles and LOD2 has 9,475 triangles. The Blender file and the FBX file contain the LOD0, LOD1 and LOD2 sets and the collision meshes. The GLB files contain the LOD0 set only. When the Blender file opens, the LOD0 set is visible and the LOD1 set, the LOD2 set and the collision meshes are hidden (unhide them in the Outliner when you need them). The car uses 22 PBR materials and 12 PNG textures in these sizes: 2048 x 1024 px (3 files), 1024 x 1024 px (5 files), 512 x 512 px (2 files), 1024 x 256 px (2 files). The texture maps are: 6 normal maps, 3 ORM maps (ambient occlusion in R, roughness in G, metallic in B), 2 base colour maps, 1 emissive map. These colour variations are included in this one product: Garnet Champagne, Midnight Silver, Pearl Bronze.
The product contains a Blender 5.2.2 LTS file with the textures packed inside, an FBX file with a clips.json file that lists the frame range of every clip, and three GLB files, one per colourway, with one animation per clip. The FBX import was checked in Blender 5.2.2 LTS (the FBX importer add-on and the native FBX importer), and the GLB import was checked in Blender 5.2.2 LTS (the glTF importer). A README, an import guide, a guide to the mechanisms and clips and a changelog are included in English.
Typical uses are product-style renders and animations, cinematics, configurators and showrooms, architectural visualisation, and real-time scenes that need a detailed car as a prop or as a hero object. The animations move the mechanisms in place. Use your own vehicle system for driving. The floor, the backdrop and the lighting of the promo images are not part of the product.
SUMMARY
- Formats: .blend (Blender 5.2.2 LTS), .fbx, .glb
- Triangles: LOD0 104,987, LOD1 39,203, LOD2 9,475
- Vertices: LOD0 55,981, LOD1 21,851, LOD2 5,289
- Materials: 22 PBR materials
- Textures: 12 PNG files, 2048 x 1024 px (3 files), 1024 x 1024 px (5 files), 512 x 512 px (2 files), 1024 x 256 px (2 files)
- UV mapping: 1 UV channel per mesh of the LOD sets (no second lightmap channel). Parts with tiling textures have UVs outside the 0-1 square
- Animation: 10 clips at 30 fps, no bones
- Scale: real-world, 1 unit = 1 m
- Support: send a message through RenderHub.
The exterior has rear-hinged coach doors without a visible centre pillar, a continuous tinted glass roof that runs from the windshield to the tail, and full-width light blades at the front and at the rear that are built from segments. In the default colourway the paint is two-tone: a deep pearl garnet upper body, a satin champagne lower body and satin bronze details. The car stands on 21/22 inch turbine wheels with visible brake discs and calipers. The four-seat interior is visible through the glass. It is finished in light leather and has a floating centre console and an ambient light strip.
Ten animation clips at 30 fps move the mechanisms: Door_L_Open, Door_R_Open, Hood_Open, Liftgate_Open, Spoiler_Deploy, Spoiler_AirBrake, ChargePort_Open, Steering, Wheels_Spin (loop), Lights_Welcome. The front hood opens over a storage tub, the glass liftgate opens, the active rear spoiler rises and tilts as an air brake, the charge-port lid opens, the front wheels steer, the wheels spin, the steering wheel turns and the light blades play a welcome sequence. The model needs no bones and no drivers, because every moving part hangs on a pivot object in a rigid hierarchy under one root.
The model is built to real-world scale, where 1 unit is 1 metre. It is 5.08 m long, 1.99 m wide without mirrors and 1.28 m high, and it has a wheelbase of 3.05 m. Three levels of detail are included as separate objects with the suffixes _LOD0, _LOD1 and _LOD2. LOD0 has 104,987 triangles, LOD1 has 39,203 triangles and LOD2 has 9,475 triangles. The Blender file and the FBX file contain the LOD0, LOD1 and LOD2 sets and the collision meshes. The GLB files contain the LOD0 set only. When the Blender file opens, the LOD0 set is visible and the LOD1 set, the LOD2 set and the collision meshes are hidden (unhide them in the Outliner when you need them). The car uses 22 PBR materials and 12 PNG textures in these sizes: 2048 x 1024 px (3 files), 1024 x 1024 px (5 files), 512 x 512 px (2 files), 1024 x 256 px (2 files). The texture maps are: 6 normal maps, 3 ORM maps (ambient occlusion in R, roughness in G, metallic in B), 2 base colour maps, 1 emissive map. These colour variations are included in this one product: Garnet Champagne, Midnight Silver, Pearl Bronze.
The product contains a Blender 5.2.2 LTS file with the textures packed inside, an FBX file with a clips.json file that lists the frame range of every clip, and three GLB files, one per colourway, with one animation per clip. The FBX import was checked in Blender 5.2.2 LTS (the FBX importer add-on and the native FBX importer), and the GLB import was checked in Blender 5.2.2 LTS (the glTF importer). A README, an import guide, a guide to the mechanisms and clips and a changelog are included in English.
Typical uses are product-style renders and animations, cinematics, configurators and showrooms, architectural visualisation, and real-time scenes that need a detailed car as a prop or as a hero object. The animations move the mechanisms in place. Use your own vehicle system for driving. The floor, the backdrop and the lighting of the promo images are not part of the product.
SUMMARY
- Formats: .blend (Blender 5.2.2 LTS), .fbx, .glb
- Triangles: LOD0 104,987, LOD1 39,203, LOD2 9,475
- Vertices: LOD0 55,981, LOD1 21,851, LOD2 5,289
- Materials: 22 PBR materials
- Textures: 12 PNG files, 2048 x 1024 px (3 files), 1024 x 1024 px (5 files), 512 x 512 px (2 files), 1024 x 256 px (2 files)
- UV mapping: 1 UV channel per mesh of the LOD sets (no second lightmap channel). Parts with tiling textures have UVs outside the 0-1 square
- Animation: 10 clips at 30 fps, no bones
- Scale: real-world, 1 unit = 1 m
- Support: send a message through RenderHub.



















